Gutter Guards

Our local roofer fits gutter guards on North Branch homes. The gutters are cleaned and their hangers and slope checked, then a screen, mesh or cover goes along each run. Leaves stay out and rain still gets in, even under winter snow and ice.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

6 Types of Gutter Guards

The six common types of gutter guards are screens, metal mesh, micro-mesh, reverse-curve covers, brush inserts and foam inserts, and they differ mainly in how fine a debris they stop and how long they last.

Screens

Plastic or steel grids that drop into the gutter. The cheapest option; plastic guards last 3 to 6 years.

Metal mesh

A perforated or expanded metal sheet over the gutter. It stops leaves but lets small seeds and needles through.

Micro-mesh

A fine stainless mesh on a frame. It keeps out pine needles and shingle grit as well as leaves, and costs the most of the screen types.

Reverse-curve covers

A solid hood that water follows around a curved lip into the gutter while leaves slide off the front. Also called surface-tension guards.

Brush inserts

Bristle tubes laid in the trough that catch leaves on top. They last 10 to 20 years.

Foam inserts

Porous foam wedges that fill the gutter. Easy to fit; they last up to 10 years and can hold seeds that sprout.

What Gutter Guards Cost by Type

Gutter guards cost about $3.70 to $10.10 per linear foot installed in Minneapolis, from vinyl screens at the low end to solid reverse-curve covers at the top. These are local figures, not a quote.

For 150 feet of gutter, a steel screen guard costs $740 to $1,010 installed in Minneapolis, and 200 feet costs $990 to $1,350. Solid reverse-curve covers cost the most. Micro-mesh, made to keep out the finest debris, sits in the middle.

Gutter guards by type, Minneapolis

Installed, per linear foot
Vinyl or PVC screenDrop-in, shortest life
$3.70–$4.80 /linear ft
MeshStops leaves, not seeds
$3.90–$4.60 /linear ft
Aluminum perforatedRigid cover with holes
$4–$4.80 /linear ft
Steel screenSteel wire screen
$4.90–$6.70 /linear ft
Micro-meshFinest debris, steel mesh
$5–$5.90 /linear ft
Foam insertsFills the trough
$5.90–$6.70 /linear ft
Brush insertsBristles in the trough
$5.90–$6.70 /linear ft
Solid or reverse curveSolid hood, curved lip
$7–$10.10 /linear ft

Signs Your Gutters Need Gutter Guards

Your gutters need gutter guards if they fill with leaves or needles more than once a season, spill over the front in heavy rain while the downspouts are clear, sprout weeds, or need a ladder trip you would rather not make.

If the gutters themselves sag, leak at the seams or pull away from the fascia, fix that first; a guard on a failing gutter only hides the problem. See gutter repair.

  • Water pours over the front of the gutter in a downpour
  • Downspouts clog with leaves or seed pods every fall
  • Plants or moss growing in the trough
  • Overhanging trees drop needles on the roof year round
  • Cleaning the gutters means a two-story ladder climb

Cleanings saved

$120 to $500 a year

A national estimate of what guards save in gutter cleanings.

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

How Gutter Guards Are Installed

Gutter guards are installed by cleaning the gutters out, checking the hangers and slope, fitting the guard along each run, and then running water through to make sure it reaches the downspouts.

  1. 1

    Clean the gutters

    Anything left in the trough stays there under the guard. See gutter cleaning.

  2. 2

    Check hangers and slope

    Loose hangers, low spots and leaking seams are fixed before the guard hides them.

  3. 3

    Fit the guard

    Depending on the type, it clips to the front lip, drops into the trough or tucks under the roof edge.

  4. 4

    Test with water

    A hose run along the roof edge shows whether water follows the guard into the gutter and out of the downspout.

A two-story house with a dark shingle roof, white aluminum gutters, and a downspout running down the corner

Do Gutter Guards Stop Ice Dams?

Gutter guards do not stop ice dams, because an ice dam forms when heat from the house melts snow on the upper roof and the water refreezes at the colder eaves, which happens above a gutter whether it is covered or not.

Ice dams need snow on the roof while the upper roof is above 32 degrees F and the lower roof is below it. The fix is sealing air leaks into the attic and adding insulation; see attic insulation and air sealing and ice dam prevention.

A guard can still freeze over in a cold snap, so meltwater runs over it instead of into the gutter until it thaws.

Ice dams

Start in the attic

The heat that melts the snow comes from the house, not the gutter.

Want our local roofer to take a look?

Send a few details or call (651) 427-2051, and our local roofer will come and look.

Get Estimate →

Who Can Install Gutter Guards in Minnesota?

Gutter guards can be installed by a contractor with a Minnesota residential building contractor or remodeler license. A roofer-only license does not cover gutter work. Our local roofer installs gutter guards, so ask for their license number when you book.

Minnesota law lists gutters and downspouts under exterior finishing, not roofing. A roofer-only license cannot be used to contract for gutters, downspouts, soffits or fascia.

You can check any license on the DLI lookup. Our page on checking a roofer's license shows how.

Before you book

Ask for the license number

A roofer-only license does not cover gutter work.

Gutter Guards FAQs

How much do gutter guards cost?

About $3.70 to $10.10 per linear foot installed in Minneapolis, or $740 to $1,010 for 150 feet of steel screen guard. That is a local figure, not a quote.

Do gutters with guards still need cleaning?

Yes, less often. Fine debris and shingle grit still get through or settle on top of the guard, so check the gutters and run water through them now and then.

Which gutter guard keeps out pine needles?

Micro-mesh is the type made for fine debris like needles. Coarser screens and metal mesh let needles and small seeds through.

How long do gutter guards last?

It depends on the type. Plastic guards last 3 to 6 years, foam up to 10 years and brush inserts 10 to 20 years.

Can guards go on my existing gutters?

Yes, if the gutters are sound. Sagging runs, leaking seams or soft fascia should be fixed first, or the guard covers a gutter that is already failing.

Get a gutter guard estimate

Tell us roughly how many feet of gutter the house has, what trees are near the roof and whether the gutters are sound. We pass it to our local roofer, who will tell you how they handle gutter guards and price the job.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.