Metal Roofing

Our local roofer installs and repairs metal roofs on North Branch homes, garages and outbuildings. Metal lasts a long time under heavy snow, ice and summer hail. They look at the roof and price the metal system that suits it.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

Types of Metal Roofing for a North Branch Home

The main types of metal roofing for a North Branch home are standing seam panels, corrugated panels, metal shingles and stone-coated steel, and each can be made from coated steel, aluminum or copper.

The profile decides how the roof looks and how its fasteners are exposed to weather. The metal decides how it resists rust, how heavy it is and what it costs. Most homes end up with coated steel, and the roofer can explain where another metal makes sense.

Standing seam

A standing seam metal roof uses long panels joined at raised seams, with the fasteners hidden under the seam, so no screw heads sit open to the weather.

Corrugated panels

Corrugated metal roofing is the wavy, screw-down panel seen on garages and pole sheds, and it is usually the lowest-cost metal profile.

Galvalume steel

A Galvalume metal roof is steel coated with an aluminum and zinc alloy, and it is the base metal under many painted panels sold today.

Stone-coated steel

Stone-coated steel roofing bonds stone granules to steel panels pressed to look like shingles, shake or tile, for owners who want metal without a metal look.

Metal shingles

Metal shingles are smaller interlocking pieces shaped like asphalt shingles, slate or shake, which suit steep, cut-up roofs with many valleys and dormers.

Copper

Copper roofing is the premium metal, usually used on a small roof such as a bay window or porch, where it weathers to a brown and then green patina.

Aluminum roofing is a lighter option that does not rust, and it comes in standing seam and shingle profiles too.

What Metal Roofing Costs

Metal roofing costs about $8 to $12 per square foot installed in Minneapolis, against $5 to $7 for asphalt shingles. The Minnesota average for metal is $10.29 per square foot. These are local figures, not a quote for your North Branch house.

A basic 1,500 sq ft metal roof in Minneapolis costs $11,800 to $18,500. Profile and metal matter more than anything else. Prices by type are national figures. Nationally, a 2,400 sq ft steel roof costs about $26,500 on average, with most jobs between $14,400 and $38,400. Another national survey runs much higher, at about $29 per square foot. Our local roofer prices your roof after seeing its size, pitch, deck and details.

Installed metal roofing by type

Installed, per sq ft
Metal roof, all typesMinneapolis
$8–$12 /sq ft
CorrugatedNational
$3.50–$26 /sq ft
Metal shinglesNational
$6–$22 /sq ft
Standing seamNational
$7–$30 /sq ft
SteelNational
$6–$16 /sq ft
AluminumNational
$4–$12 /sq ft
CopperNational
$15–$30 /sq ft

Want a real price for metal roofing?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

How Long a Metal Roof Lasts

A metal roof lasts about 40 to 70 years, and copper and zinc can pass 100 years.

That compares with 25 to 30 years for architectural asphalt shingles. The panels themselves rarely wear out first. What needs attention over the decades is the small stuff: exposed screws and their washers on screw-down panels, sealant at laps and flashing, and pipe boots. When those need work, see metal roof repair.

Expected life

40 to 70 years

Typical range for metal roofs, against roughly 25 to 30 years for architectural shingles.

Metal Roofing vs Asphalt Shingles

Metal roofing costs more than asphalt shingles up front but lasts far longer, about 40 to 70 years against 25 to 30, so the choice between them comes down to how long you plan to stay and how much you can spend now.

If you expect to sell in a few years, a new asphalt shingle roof is usually the better value. If this is the house you plan to keep, metal spreads its cost over many more winters.

Asphalt shingles

  • About $5 to $7 per sq ft installed in Minneapolis
  • About 25 to 30 years for architectural shingles
  • Snow tends to stay on the roof
  • Any roofer can work on it
  • Easy to patch a few shingles

Metal roofing

  • About $8 to $12 per sq ft installed in Minneapolis
  • About 40 to 70 years
  • Snow slides off, so plan for snow guards
  • Needs a crew that installs metal
  • Panels and trim are ordered to fit

Not sure which way to go?

Our local roofer will look at your roof and tell you which option suits it. Send a few details or call (651) 427-2051.

Get Estimate →

Metal Roofing and Minnesota Snow

Metal roofing handles Minnesota snow well because snow slides off smooth metal panels, but that sliding snow has to be managed over doors, decks and walkways with roof snow guards.

A sheet of snow letting go from a metal roof can bend gutters, crush shrubs and hurt someone below. The roofer plans where snow will land before the panels go on. The same code rules apply to a metal reroof as to any other.

50 psfGround snow load for Chisago, Isanti, Anoka and Washington counties. Pine and Kanabec are 60 psf.
24 inMinnesota code requires ice barrier from the eave to at least 24 inches inside the exterior wall line. See ice and water shield.
2 layersMinnesota code does not allow a recover over a roof that already has two or more layers.

How a Metal Roof Replacement Works in North Branch

A metal roof replacement in North Branch starts with a city reroofing permit, then a tear-off or approved recover, a tear-off inspection of the deck and ice barrier, the metal install and a final inspection.

North Branch requires a permit to reroof a residence. Either the homeowner or a contractor licensed by the State of Minnesota may pull it, following the city's re-roofing permit process.

  1. 1

    Inspection and quote

    The roofer looks at the deck, pitch, layers, chimneys and vents, then gives a written price for the metal profile you choose.

  2. 2

    Permit

    A North Branch reroof permit is pulled before work starts, and the fee is due when the application is submitted.

  3. 3

    Tear-off

    Old roofing comes off down to the deck unless a recover is allowed, and any soft or rotted decking is replaced.

  4. 4

    Tear-off inspection

    The city inspector checks the decking and confirms the ice and water barrier runs 24 inches up past the exterior wall.

  5. 5

    Metal install and final

    Underlayment, trim, panels, flashing and any snow guards go on, and the final inspection confirms all roofing and flashing is in place.

An aerial view of a large house with a dark blue standing seam metal roof and multiple hip sections

More Metal Roofing Services

More metal roofing services around North Branch include standing seam and metal shingle installs, aluminum roofs, repairs to existing metal roofs and snow guards for any of them.

Metal Roofing FAQs

Is metal roofing worth it in Minnesota?

Yes, metal roofing is often worth it in Minnesota if you plan to stay in the house, because it lasts about 40 to 70 years against roughly 25 to 30 for architectural shingles. It costs more up front, so it pays back best over a long stay.

Can a metal roof go over my old shingles?

Sometimes, but only if the code allows a recover. Minnesota code lets a new roof go over an existing one when the manufacturer's instructions allow it. It is not allowed over a water-soaked or deteriorated roof, or one that already has two or more layers. The roofer checks this at the inspection.

Is a metal roof loud in the rain?

No, a metal roof over a solid deck and underlayment is not much louder than shingles from inside the house. Panels screwed to open framing over an unheated garage or shed are much louder.

Do I need a permit for a metal roof in North Branch?

Yes, North Branch requires a permit to reroof a residence, whatever the material. Either you or a state-licensed contractor can pull it, and the city inspects at tear-off and at the end.

Does a metal roof stop ice dams?

No, a metal roof does not stop ice dams by itself, though snow sheds off it more easily. Ice dams form when the upper roof is above freezing while the eaves are below it. Air sealing and insulation are the long-term fix. See ice dam prevention.

Get a metal roofing estimate

Send a few details about your roof and the metal you are considering. Our local roofer will look at your roof and price it. You can also read how to check a roofer's license.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.