Gutter Repair

Our local roofer repairs leaking and sagging gutters on North Branch homes. They reseal seams, refasten or replace hangers, reset the slope and replace sections too far gone to patch. Most of the work here is undoing what a winter of ice did.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

Signs Your Gutters Need Repair

Your gutters need repair when water drips from the seams or corners, a run sags or pulls away from the fascia, water stands in the trough after rain, or a downspout has come loose or crushed.

Most of these show up in spring, after ice has sat in the gutters for months. Look along the gutter line from the ground on a rainy day.

  • Drips from joints, corners or end caps while the rest of the gutter is dry
  • A run that dips between hangers or has pulled away from the house
  • Puddles in the trough a day after rain
  • Rust spots, holes or split seams
  • Peeling paint or rot on the fascia behind the gutter
  • A downspout detached at the elbow or dumping water against the foundation

After the thaw

Check every spring

Ice weight loosens hangers and opens seams over the winter.

6 Common Gutter Repairs

The six most common gutter repairs are resealing leaking seams, refastening loose hangers, fixing the slope, patching holes, reattaching downspouts and replacing a damaged section, and most are done without taking the whole gutter down.

Reseal seams

Old sealant at joints and end caps is cleaned out and replaced so the seam stops dripping.

Refasten hangers

Loose spikes or hangers are replaced with screws into sound fascia. Soft fascia has to be fixed first; see soffit and fascia.

Fix the slope

Hangers are reset so each run falls slightly toward its downspout and stops holding water that freezes.

Patch holes

Small holes and rust spots get a matching metal patch set in sealant.

Reattach downspouts

Elbows and straps are refastened, and extensions carry water well away from the foundation.

Replace a section

A length too bent or rusted to patch is cut out and replaced with matching gutter.

Want our local roofer to take a look?

Send a few details or call (651) 427-2051, and our local roofer will come and look.

Get Estimate →

How Box Gutters Are Repaired

Box gutters are repaired by patching the metal lining where it has split or rusted through, or by relining the whole trough, because a box gutter is built into the roof edge and its leaks run into the cornice and walls rather than onto the ground.

A box gutter, also called a built-in gutter, is a wooden trough framed into the eave of many older houses and lined with metal, with the roof running down into it. The most common box gutter repair is relining or patching, at $20 to $50 per linear foot. That is a national range, not a quote. Box gutters are usually the most expensive gutter style.

Because water from a failed box gutter goes straight into the wood around it, check the cornice and fascia boards for rot when the lining is opened. Box gutters sit where the roof meets the eave, so ask our local roofer how they handle them along with the roof edge.

A close-up of a badly rusted metal gutter below gray asphalt shingles, with flaking paint, a rusted-through hole, and a bent metal hanger strap

Box gutter relining

$20 to $50 per ft

National range for relining or patching. Not a quote.

What Gutter Repair Costs

Gutter repair costs about $194 to $643 for a typical job, with a national average of $400. That is a national range and not a quote.

Height changes the price more than material. National averages run from $170 for a one-story house to $330 for two stories and $500 for three or more.

Gutter repair by material, national ranges

Per repair job
VinylSectional, snap-together
$75–$200
AluminumMost common
$85–$200
SteelHeavier, can rust
$100–$225
CopperSoldered seams
$125–$250
ZincPremium metal
$150–$325

Want a real price for gutter repair?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

Repair or Replace Your Gutters?

Repair your gutters when the trouble is a few leaking seams, loose hangers or one damaged section; replace them when leaks and sagging run the length of the house or the metal is rusting through in many places.

Full gutter replacement runs $1,600 to $2,175 nationally. Aluminum and galvanized steel gutters last about 20 years, and copper about 50. New gutters are covered on gutter installation.

Repair

  • Leaks at a few seams or corners
  • One run sagging from loose hangers
  • A single dented or split section
  • Gutters well short of 20 years old

Replace

  • Leaks and sags along most of the house
  • Rust through the trough in several places
  • Sectional gutters with seams that keep reopening
  • A new roof going on, so the edge is open anyway

Who Can Repair Gutters in Minnesota?

Gutters can be repaired by a contractor with a Minnesota residential building contractor or remodeler license, or by you on your own home. A roofer-only license does not cover gutter work. Our local roofer repairs gutters, so ask for their license number when you book.

Minnesota law lists gutters and downspouts under exterior finishing, not roofing. A roofer-only license cannot be used to contract for gutters, downspouts, soffits or fascia.

Homeowners working on their own home are exempt under Minnesota law, so resealing your own seams is allowed.

Before you book

Ask for the license number

A roofer-only license does not cover gutter work.

Gutter Repair FAQs

How much does gutter repair cost?

About $194 to $643 for a typical job, averaging $400. Another national range is $218 to $396. Neither is a quote.

Can a sagging gutter be fixed without replacing it?

Usually, yes. New hangers screwed into sound fascia lift the run back to the right slope. If the fascia behind it is rotten, that has to be replaced first.

What is a box gutter?

A box gutter is a gutter built into the eave of the house, usually a wooden trough lined with metal, instead of a gutter hung on the fascia. It is repaired by patching or relining the metal.

Why do my gutters leak at the corners?

Corners and end caps are joints, and the sealant in a joint dries out and cracks with age and freeze-thaw. Cleaning out the old sealant and resealing usually stops the drip.

Should I add gutter guards after a repair?

If clogging caused the overflow or sagging, often yes. See gutter guards for the types and costs, and gutter cleaning for keeping them clear.

Get a gutter repair estimate

Tell us where the gutter leaks or sags, how many stories the house has and whether it has box gutters built into the roof edge. We pass it to our local roofer, who will tell you how they handle gutter repair and price it.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.