Roofing Calculator for Minnesota Homes

Work out your roof's size, pitch, materials and cost in one place. Measure the house from the ground, add the garage or porch as their own sections, and the calculator does the rest. The ice barrier and shingle rules follow Minnesota code.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

Roofing Calculator: Size, Pitch, Materials and Cost

This roofing calculator turns the outside measurements of your house into roof area, squares, shingle bundles, the rest of the materials list and a planning price. Start with the roof size, then check the pitch, the materials and the cost.

Measure the outside walls at ground level, one roof section at a time. Add the garage, a porch or an addition as their own sections if their roof is separate.

Valleys, hips and dormers mean more cut shingles. Pick more waste for a cut-up roof.

Roof area

0 sq ft

0 squares, 0 with waste

Pitch

Pitch
6:12
Angle
26.6°
Slope factor
1.118
Grade
50%

Materials

Shingle bundles
0
Starter strip (eaves and rakes)
0 ft
Ridge and hip cap
0 ft
Drip edge
0 ft
Ice and water shield at the eaves
0 sq ft
Underlayment over the rest
0 sq ft
Deck sheets, 4 x 8 ft, if all replaced
0

Cost range

Total $0

Get a written estimate →

Your measurements go into the estimate request so our local roofer sees them.

How to Measure Your Roof From the Ground

You can measure your roof from the ground by measuring the outside walls, the overhang and the pitch. You never need to climb up.

  1. 1

    Measure the walls

    Run a tape along the length and width of the house at ground level. Use the outside of the walls, not the rooms inside.

  2. 2

    Split the roof into sections

    Measure the garage, a porch or an addition on its own if its roof is separate or at a different pitch, and add each one as a section.

  3. 3

    Measure the overhang

    Measure how far the roof edge sticks out past the wall at the eaves.

  4. 4

    Find the pitch

    Hold a level flat against the roof edge or a rafter in the attic, measure 12 inches along it, then measure straight up to the roof. That number is the rise. A phone level app laid on the roof edge gives the angle instead.

  5. 5

    Pick the shape

    A gable roof slopes two ways from a ridge, a hip roof slopes on all four sides, and a shed roof slopes one way. Choose flat for a roof under 2:12.

A roofing crew works on a ranch house roof covered in underlayment, with bundles of new shingles stacked along the ridge

Rather have it measured?

Our local roofer will measure your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

How Many Squares Is My Roof?

Your roof is its area in square feet divided by 100, because roofers price and order by the square, which is 100 square feet of roof.

Roof area is bigger than the floor plan. Add the overhang on every side, then multiply by the slope factor for the pitch. A 48 by 28 foot house with a 12-inch overhang covers 50 by 30 feet, or 1,500 square feet. At a 6:12 pitch that is 1,500 times 1.118, about 1,677 square feet, or 16.8 squares.

Add a waste allowance before ordering. A simple gable roof wastes less than a hip roof with valleys and dormers, where more shingles are cut.

One square

100 sq ft

Roofing is priced and ordered by the square.

Roof Pitch Chart: Angle and Slope Factor

The roof pitch chart gives the angle and slope factor for each common pitch, and the Minnesota rule that applies at it. Multiply the flat area by the slope factor to get the roof area.

PitchAngleSlope factorIn Minnesota
2:129.5°1.014Lowest pitch for asphalt shingles; two layers of underlayment
3:1214.0°1.031Two layers of underlayment under shingles
4:1218.4°1.054Standard underlayment from here up
5:1222.6°1.083Standard underlayment
6:1226.6°1.118A common pitch on Minnesota houses
7:1230.3°1.158Standard underlayment
8:1233.7°1.202Ice barrier at least 36 in up the slope
9:1236.9°1.250Ice barrier at least 36 in up the slope
10:1239.8°1.302Ice barrier at least 36 in up the slope
11:1242.5°1.357Ice barrier at least 36 in up the slope
12:1245.0°1.41445 degrees; ice barrier at least 36 in up the slope

How Many Bundles of Shingles Do I Need?

Most shingles take three bundles per square, so a 20-square roof needs about 60 bundles plus waste. Some shingles take more, so check the coverage printed on the wrapper.

Bundles are only part of the order. A shingle roof also needs starter strip along the eaves and rakes, cap shingles for the ridge and hips, drip edge, ice and water shield at the eaves and underlayment over the rest. The calculator's materials tab lists each one from your measurements.

Below 2:12, shingles are not allowed at all, so the calculator leaves very low sections out of the bundle count. Those need a membrane such as EPDM or TPO.

Most shingles

3 bundles a square

Check the wrapper: some shingles take more.

Minnesota Code Rules the Calculator Uses

The Minnesota code rules behind the calculator cover how low shingles can go, the underlayment on a low roof, the ice barrier at the eaves and how many layers a roof may have.

No shingles below 2:12

Asphalt shingles are not allowed on a roof flatter than 2:12. A lower roof needs a membrane or a low-slope metal roof.

Double underlayment at 2:12 to 4:12

Shingles on a low pitch go over two layers of underlayment, so the calculator flags those sections.

Ice barrier at the eaves

The ice barrier runs from the eave edge to at least 24 inches inside the heated wall, and at least 36 inches up the slope on 8:12 and steeper. See ice and water shield.

Two layers at most

A roof with two layers already on is torn off to the deck. See new shingles over old.

Want a real price for your roof?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

What the Calculator's Price Range Includes

The price range covers the roofing installed, tearing off the old layers and replacing the roof deck you choose. Asphalt and metal use Minneapolis figures and the other materials use national ones, so treat the range as a plan, not a quote.

A written estimate also covers what the calculator cannot see: the permit, flashing around chimneys and skylights, vents, how steep and how high the roof is, and how much rotten deck turns up. For what goes into a real price, see roof replacement cost, and for paying for it, roof financing.

Questions about Roofing Calculators

How accurate is a roofing calculator?

Close enough to plan with. Measuring the walls and adding the overhang and pitch gets most simple roofs within a few percent, but valleys, dormers and a second pitch add area a footprint cannot show.

How do I find my roof pitch without climbing on the roof?

Measure from the attic: hold a level against a rafter, mark 12 inches along it and measure straight up to the rafter. Or lay a phone level app on the roof edge from a ladder and read the angle.

Is a hip roof bigger than a gable roof?

Not for the same house and pitch. Both cover the footprint times the slope factor, but a hip roof has more hips to cap and more cut shingles, so allow more waste.

How many squares is a 2,000 square foot house?

It depends on the overhang and pitch, and on whether the house has one or two stories. A 2,000 square foot ranch at 6:12 with a 12-inch overhang is about 24 to 25 squares of roof; a two-story house of the same floor area has about half that roof.

Does the price include the permit?

No. The calculator covers the roofing, tear-off and deck. A written estimate adds the permit and the details of your roof.

Get a roof estimate

Your calculator measurements go into the request, so our local roofer can see them before they look at your roof.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.