Roof Framing Repair
Our local roofer repairs sagging or broken rafters, trusses and ridge boards on North Branch homes. The roof is shored up, the cause found, and the damaged pieces braced or replaced before the roof goes back on. The repaired frame has to carry Chisago County's snow load.
Signs Your Roof Framing Needs Repair
Your roof framing needs repair when the ridge line dips instead of running straight, the roof surface sags between rafters, rafters or truss members in the attic are cracked, split or pulled apart at a joint, or the tops of the walls are pushing outward.
On farm buildings, the warning signs of roof collapse are bulging sidewalls, a roof line that is no longer straight and damage to ceilings or trusses. If you see damage, do not climb onto the roof or go into the building.
- A ridge that dips or sways when seen from the street
- Dips in the roof surface between rafters or along a valley
- Cracked, split or bowed rafters or truss members in the attic
- Truss plates or joints pulled loose
- Cracks where upstairs walls meet the ceiling
- Dark, soft wood around old leaks
Heavy snow on a sagging roof
Stay off it
Clear what you can from the ground with a roof rake, and keep people out of rooms under the sag.
4 Causes of a Sagging Roof
The four usual causes of a sagging roof are more snow and ice weight than the framing was built for, rot from a long-running leak, trusses or rafters that were cut or altered, and walls spreading apart because the roof is missing the ties that hold it together.
Snow load
Minnesota sets the ground snow load at 50 psf in Chisago, Isanti, Anoka and Washington counties and 60 psf in Pine and Kanabec. See roof snow removal.
Rot from leaks
Water from a leak or an ice dam soaks the deck and the tops of the rafters until they lose strength. See roof decking replacement.
Altered framing
Truss webs cut for an attic stair, a duct or storage weaken the whole truss. The code does not allow it without a design professional's approval.
Spreading walls
Minnesota code requires continuous ties across the structure to prevent roof thrust on the walls. Without them the ridge drops as the walls push out.
Want our local roofer to take a look?
Send a few details or call (651) 427-2051, and our local roofer will come and look.
Rafters vs Trusses: Why It Matters for the Repair
Rafters and trusses are repaired differently. A cracked rafter can often be strengthened by fastening a new board alongside it, called sistering. A truss is an engineered unit. Minnesota code bars cutting, notching, drilling, splicing or otherwise altering one without a registered design professional's approval.
In practice a damaged truss is repaired to an engineer's or the truss maker's repair detail, or replaced.
You can tell them apart in the attic. Rafters are single sloped boards running from the wall to the ridge; trusses are triangles of lighter lumber joined with metal plates.
Truss repairs
No cutting trusses
Truss repairs need a registered design professional's approval.
How Roof Framing Is Repaired
Roof framing is repaired by shoring the sagging area with temporary supports, working out the cause, getting an engineer's design where trusses or major members are involved, strengthening or replacing the damaged framing, and then restoring the deck and roof covering over it.
- 1
Shore it up
Temporary posts and beams take the load off the damaged members before anything is cut or jacked.
- 2
Find the cause
A leak, cut truss or missing tie has to be fixed too, or the new framing sags the same way.
- 3
Get the design
For trusses and larger sags, an engineer specifies the repair. A professional engineer is the right person to evaluate the structure.
- 4
Repair the framing
Rafters are sistered or replaced, trusses repaired to the approved detail, and ties or bracing added.
- 5
Close the roof
Damaged decking is replaced and the roofing goes back on, with the city inspecting where a permit was required.
What Roof Framing Repair Costs
Roof framing repair for a sagging roof costs about $750 to $3,000 by one national estimate and $800 to $5,000 by another. A truss repair runs $500 to $5,000. These are national ranges, not a quote.
An engineer's assessment is often part of the cost. A structural engineer costs $500 to $2,000, around $1,200 on average. Structural roof repairs can reach $8,000.
Roof framing repairs, national ranges
Whole jobWant a real price for roof framing repair?
Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.
Who Can Repair Roof Framing in Minnesota?
Roof framing can be repaired by a licensed Minnesota roofer, but building new framing needs a residential building contractor or remodeler license. Our local roofer repairs roof framing, so ask for their license number when you book.
Under Minnesota law, roofing work includes repairing a roof support system but not building a new one. Rough framing counts as carpentry.
A permit is also likely. Under Minnesota's building rules, removing or cutting any structural beam or load bearing support is not an ordinary repair. Check with North Branch City Hall at 651-674-8113 before work starts.
Before you book
Ask for the license number
A roofer can repair roof framing. Building new framing needs a different license.
Roof Framing Repair FAQs
How much does it cost to fix a sagging roof?
About $750 to $3,000 by one national estimate and $800 to $5,000 by another. National ranges, not a quote.
Do I need an engineer to repair roof trusses?
Yes, to alter or repair a truss. Minnesota code bars cutting, notching, drilling, splicing or otherwise altering truss members without a registered design professional's approval.
Can a sagging roof be fixed without replacing the whole roof?
Often, yes. The framing under the sag is repaired and only the decking and roofing over that area are replaced, unless the roofing is worn out anyway.
Is a sagging roof dangerous?
It can be. A sag is framing that is already carrying more than it can, and snow adds more. Keep people out from under it and have it looked at before the next heavy snowfall.
Get a roof framing estimate
Tell us where the roof sags, what you can see in the attic and whether there has been a leak. We pass it to our local roofer, who will tell you how they handle framing repair and what the next step is.
Call now (651) 427-2051 Roofing in North Branch and the towns around it