Roof Decking Replacement

Our local roofer replaces rotted or soft roof decking on North Branch homes, the plywood or OSB under the shingles. Bad decking usually turns up during a tear-off or as a spongy spot on the roof. New sheets mean the new shingles are nailed into sound wood.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Roof Sheeting Is

Roof sheeting, also called roof decking or sheathing, is the layer of plywood, OSB or wood boards nailed across the rafters or trusses that the underlayment and shingles are fastened to.

Minnesota code requires asphalt shingles to be fastened to solidly sheathed decks or to 1-inch nominal wood boards. Shingles nailed into soft or rotted sheeting don't hold, and they tend to lift in the first strong wind.

Roof sheathing is part of a residential roofer's work under Minnesota law, which defines a residential roofer as someone contracting for work on roof coverings, roof sheathing, roof weatherproofing and insulation.

Also called

Decking or sheathing

Roof sheeting, roof decking and roof sheathing all mean the same layer.

Signs Your Roof Sheeting Needs Replacing

Signs your roof sheeting needs replacing include soft or spongy spots on the roof, sagging between rafters, dark stains or mold on the underside of the deck in the attic, and shingles that won't lie flat.

Most of these show from the attic with a flashlight. Push gently on a stained area of the underside with a screwdriver: sound wood resists, rotted wood gives. If the rafters themselves are cracked or the ridge dips, see roof framing repair.

  • Soft or bouncy spots when the roof is walked
  • A dip or sag between rafters, visible from the ground
  • Dark staining, mold or delaminating layers on the attic side
  • Daylight showing through the boards
  • Rusted nail tips or heavy frost on the attic side in winter
  • Shingles that buckle or won't stay nailed

Quick check

Look from the attic

The underside of the deck shows rot long before the shingles do.

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

What Causes Roof Decking to Rot

Roof decking rots when it stays wet, most often from a long-running leak, from ice dam water backing up at the eaves, or from warm, moist house air condensing on the cold underside of the deck in winter.

Slow leaks

A cracked vent boot or bad flashing can drip for years before a ceiling stain shows. Fixing the roof leak early saves the sheeting around it.

Ice dams

Ice dams form when upper parts of the roof are above freezing while the eaves are below it, and the backed-up water soaks the deck at the edge. See ice dam prevention.

Attic moisture

Warm air leaking into the attic condenses on the cold deck. Minnesota code requires attic venting of 1 square foot per 150 square feet in most cases; see roof ventilation.

What Roof Sheeting Replacement Costs

Roof sheeting replacement costs $2 to $8 per square foot, a national range and not a quote. Our local roofer prices the job once they can see how much sheeting is bad.

Broken down further, decking panels run $2.27 to $4.13 per square foot plus labor at $0.89 to $1.62. That comes to $3,160 to $5,749 for 1,000 square feet. A small patch around a leak is priced as a repair instead.

Roof decking, national ranges

Installed, per sq ft unless shown
Decking replacementInstalled
$2–$8 /sq ft
Decking panelsMaterial only
$2.27–$4.13 /sq ft
Decking laborLabor only
$0.89–$1.62 /sq ft
Decking repairSmall area
$150–$1,000
1,000 sq ft of deckingTotal
$3,160–$5,749

Want a real price for roof decking replacement?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

Plywood vs OSB Roof Sheeting

Plywood and OSB both make a solid roof deck, and the main differences are that plywood costs a little more and tends to recover better after getting wet, while OSB is cheaper and more uniform from sheet to sheet.

As national material figures, a 4x8 sheet of construction-grade plywood costs about $10 and OSB about $6. Installing 500 square feet runs about $650 for plywood versus $590 for OSB. Those are not installed per-sheet reroof prices or a quote.

OSB

  • Lower material cost
  • Consistent sheets with no voids
  • Edges can swell if they stay wet
  • Common on newer homes

Plywood

  • Higher material cost
  • Tends to dry out and recover after wetting
  • Lighter for the same thickness
  • Often matched when patching an older plywood deck

How Roof Sheeting Is Checked During a North Branch Reroof

During a North Branch reroof, roof sheeting is checked at the city's tear-off inspection. The inspector looks at the bare decking and confirms the ice and water barrier runs 24 inches past the exterior wall.

  1. 1

    Permit

    A permit is required to reroof a residence in North Branch, and you or a state-licensed contractor can apply for it.

  2. 2

    Tear-off to the deck

    A roof replacement removes existing layers down to the deck, which is when hidden rot finally shows.

  3. 3

    Replace bad sheets

    The roofer walks the bare deck, marks soft or delaminated sheets, cuts them out to the rafters and nails in new ones.

  4. 4

    Tear-off inspection

    The city inspector checks the decking and the ice barrier. Inspections are booked at 651-674-8113 at least 24 hours ahead.

  5. 5

    Dry-in and shingle

    Underlayment and shingles go on, and the final inspection checks that all roofing and flashing is in place.

Workers strip torn shingles and lay new roof decking on a storm-damaged house while debris and a fallen tree lie in the yard

This is one reason a new layer can't simply go over a bad roof: Minnesota's code bars an overlay when the existing roof is water soaked or deteriorated. More on that on the roof replacement page.

Roof Sheeting FAQs

Can roof sheeting be replaced without a whole new roof?

Yes, for a small area. The roofer removes the shingles over the bad spot, replaces the sheeting and re-shingles it. Decking repair costs about $150 to $1,000, a national range and not a quote.

How do I know how much sheeting needs replacing before the tear-off?

You usually don't, exactly. The roofer can spot soft areas and attic stains, but the full picture shows only once the shingles are off. Ask how the contract prices extra sheeting, since Minnesota requires the contract to state the price or how it is calculated.

Can new shingles go over rotted decking?

No. Minnesota's code does not allow a roof recover when the existing roof is water soaked or deteriorated, and shingles need a solid deck to hold their nails.

Is plywood or OSB better for roof sheeting?

Both work. Plywood costs a little more and tends to handle wetting better; OSB costs less. The roofer will usually match what is already on the roof when patching.

Does insurance pay for rotted roof decking?

That is for your insurer to decide. Minnesota law bars a contractor from interpreting your policy unless licensed as a public adjuster. The roof insurance claim page explains the rules.

Get a roof sheeting estimate

Tell us where the roof feels soft or what you have seen in the attic, and whether you are planning a reroof. We pass it to our local roofer, who checks the decking and prices the work.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.