Roof Snow Guards

Our local roofer installs snow guards on metal roofs around North Branch. Snow guards hold snow in place so it melts off a little at a time. Without them the whole roof can slide onto your entry, deck, car or gutters at once.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Snow Guards Do on a Metal Roof

Snow guards on a metal roof hold snow and ice on the panels so they release gradually as they melt, instead of sliding off in one heavy sheet.

A metal roof is smooth, and when the sun or attic heat loosens the bottom of the snowpack, the whole load can let go together. Guards break that sheet into smaller sections that stay put until they melt or drop off in small amounts.

Best fit

Slick, steep roofs

Metal panels shed snow far more readily than asphalt shingles do.

Signs Your Roof Needs Snow Guards

Your roof needs snow guards if snow slides off it in sheets over doors, walkways, decks, driveways or lower roofs, or if sliding snow has already bent gutters or damaged things below.

Sliding snow can tear gutters off the fascia and pile up against a lower roof, where it can feed an ice dam.

  • Snow avalanches off the roof over an entry door or steps
  • A deck, patio, car or AC unit sits under the eaves
  • Gutters bent or pulled loose after a thaw
  • A lower roof or porch roof catches snow from above
  • Snow drops onto a walkway people use in winter

Priority

Over doors first

Guard the stretches of eave above places people walk.

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

Types of Snow Guards for Metal Roofs

The main types of snow guards for metal roofs are clamp-on bar or fence systems for standing seam panels, individual pad or cleat guards set in a pattern, and fastened guards made for exposed-fastener panels.

Bar or fence systems

A continuous rail held by clamps on the seams of a standing seam roof, with no holes through the panel.

Pad or cleat guards

Small individual guards spread across the roof in staggered rows to hold snow in many places.

Fastened guards

Guards screwed through exposed-fastener panels, which must be sealed at every screw to keep water out.

Guards for shingle roofs

Less common, and usually set in during reroofing so the shingle laps cover the mounting.

How a Roofer Plans Snow Guard Placement

A roofer plans snow guard placement by looking at the roof pitch, panel type, length of the slope and what sits below the eaves, then sets guards near the eave and adds rows higher up on long or steep slopes.

  1. 1

    Measure the slope

    Pitch and run length decide how much snow can push on the guards.

  2. 2

    Identify the panel

    Standing seam, exposed-fastener and shingle roofs each take a different mount.

  3. 3

    Map what is below

    Doors, decks, drives and lower roofs set which runs of eave get guards first.

  4. 4

    Follow the layout

    Rows and spacing follow the guard maker's instructions for that roof.

  5. 5

    Seal and check

    Any penetrations are sealed and the mounts are checked so they do not loosen.

An aerial view of a large house with a dark blue standing seam metal roof and multiple hip sections

Snow Guards and Minnesota Snow Load

Snow guards and Minnesota snow load go together because guards keep snow on the roof, so the structure carries it, and homes in Chisago County are designed for a 50 psf ground snow load, or about 35 psf on the roof.

Guards are not a reason to let snow pile up without limit. After heavy storms, watch the eaves for ice and use roof snow removal if the load looks excessive. Snow held at the eave over a warm attic can still form a dam, which is why ice dam prevention still matters on a metal roof.

Roof snow load

35 psf

Design roof load for a 50 psf ground load under Minnesota code.

Snow Guards vs Letting Snow Slide

Snow guards are the better choice when people, cars, decks or lower roofs sit under the eaves, while letting snow slide is fine where it lands in open yard with nothing below.

Let it slide

  • Eaves over open lawn or garden
  • No doors or paths under the drip line
  • No gutters to protect
  • Pole barns or outbuildings set away from traffic

Install snow guards

  • Entries, steps and walkways below
  • Decks, cars, AC units or a lower roof below
  • Gutters you want to keep
  • Long, steep metal slopes

Not sure which way to go?

Our local roofer will look at your roof and tell you which option suits it. Send a few details or call (651) 427-2051.

Get Estimate →

Roof Snow Guards FAQs

Do I need snow guards on a metal roof?

You need snow guards on a metal roof if anything you care about sits below the eaves, such as an entry, deck, car, gutters or a lower roof. Over open yard, many metal roofs do without them.

How much do snow guards cost?

There is no standard snow guard price. It depends on roof length, panel type and guard style, and our local roofer quotes it after seeing the roof.

Can snow guards be added to an existing metal roof?

Yes, snow guards can be added to an existing metal roof. Clamp-on systems attach to standing seams, and fastened guards go on exposed-fastener panels with each screw sealed.

Do snow guards damage a metal roof?

Not when installed correctly. Clamp-on guards avoid holes in the panel, and screwed guards need sealed fasteners; any leak at a mount is a job for metal roof repair.

Do snow guards work on shingle roofs?

Yes, but they are less common, since asphalt shingles hold snow better than metal. On shingles they are usually installed during reroofing.

Get a snow guard estimate

Tell us what kind of roof you have and where snow comes off it. Our local roofer will look at the roof and quote guards to suit, or check your metal roof at the same time.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.