Soffit and Fascia

Our local roofer repairs and replaces soffit and fascia on North Branch homes. The fascia is the board the gutters hang on, and the soffit closes the underside of the overhang. When they rot or come loose, you get water damage, animals in the attic and blocked vents.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Soffit and Fascia Are

Soffit and fascia are the two parts of a roof overhang: the fascia is the vertical board along the roof edge that the gutters attach to, and the soffit is the horizontal panel underneath that closes the overhang and usually holds the attic's intake vents.

The fascia takes the most water. It sits right behind the gutter and just below the shingle edge, so any water that runs back off the roof or overflows the gutter soaks it first. Metal drip edge over the top of the fascia is the main thing that keeps it dry.

The soffit's job is mostly air and pests. Vented soffit panels let outside air into the attic at the eaves, and a tight soffit keeps birds, bats and squirrels out of the roof space.

A two-story house with a dark shingle roof, white aluminum gutters, and a downspout running down the corner

Quick guide

Fascia faces out

Fascia is the vertical edge board; soffit is the panel underneath.

Signs Your Soffits and Fascia Need Replacing

Signs your soffits and fascia need replacing include soft or crumbling fascia boards, peeling paint that keeps coming back, gutters pulling away from the house, sagging or missing soffit panels, and animals getting into the attic at the eaves.

If the gutter itself is leaking or sagging on sound fascia, see gutter repair.

  • Fascia wood that is soft, dark or crumbling, often behind the gutter
  • Paint that peels again within a season or two
  • Gutters pulling away or hangers that won't stay tight
  • Sagging, cracked or missing soffit panels
  • Droppings, nesting material or chewed gaps at the eaves
  • Water stains on the soffit below an ice dam spot

Look behind

The gutter

Fascia rot usually starts out of sight behind the gutter.

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

Who Can Replace Soffit and Fascia in Minnesota?

In Minnesota, soffit and fascia replacement can be contracted under a residential building contractor or residential remodeler license. A roofer-only license cannot be used to contract for soffits or fascia.

So if you want one company to do the roof and the trim, ask which license it holds and check it on the DLI license lookup. If it holds a roofer-only license, ask who will do the soffit and fascia and check that contractor too. Our guide to checking a roofer's license in Minnesota explains the lookup.

The same rule covers gutters and downspouts; see gutter installation.

Before you book

Ask for the license number

A roofer-only license does not cover soffit or fascia.

What Soffit and Fascia Replacement Costs

Soffit and fascia replacement costs $1,050 to $3,300 for a typical job, with an average near $2,500, or $6 to $20 per linear foot. These are national ranges, not a quote.

Rotted rafter tails or decking found behind the fascia add to the job, and the contractor prices it after seeing the eaves.

Soffit and fascia by material, national ranges

Per linear foot
Wood or cedarNeeds paint
$1–$3 /linear ft
Fiber cementPaintable, rot resistant
$1–$5 /linear ft
CompositeLow upkeep
$1–$8 /linear ft
uPVC or PVCLow upkeep
$3–$7 /linear ft
VinylCommon on newer homes
$5–$9 /linear ft
AluminumOften wraps wood fascia
$8–$20 /linear ft

Want a real price for soffit and fascia?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

How Soffit Vents Affect Attic Ventilation

Soffit vents supply the intake air for attic ventilation, and Minnesota's residential code calls for 1 square foot of net free vent area per 150 square feet of attic, or 1 per 300 when a vapor retarder is in place and 40 to 50 percent of the venting is near the ridge.

Air comes in low at the soffits and leaves high at the ridge or roof vents. Blocked soffits break that flow.

Intake at the eaves

Vented soffit panels let cold outside air into the attic. The 1/150 rule applies where roof and soffit vents are used together.

Blocked by insulation

Blown insulation can bury the soffit vents from inside. Baffles at each rafter bay hold a channel open. See roof ventilation.

Ice dams

Venting helps, but the first step is to make the ceiling airtight, then insulate. See ice dam prevention.

Reroofing

North Branch does not require ventilation to be upgraded when reroofing, though new soffits are a good time to fix it.

Wood vs Aluminum or Vinyl Soffit and Fascia

Wood soffit and fascia can be painted any color and match older trim but need repainting and rot if water gets behind them, while aluminum and vinyl soffit and fascia need little upkeep and don't rot but come in set colors and can dent or crack.

Wood

  • Paint any color, matches older homes
  • Needs repainting every few years
  • Rots where water sits
  • Lowest material cost per foot

Aluminum or vinyl

  • Little upkeep, no painting
  • Does not rot
  • Vented soffit panels widely available
  • Aluminum can dent; vinyl can crack in hard cold

Soffit and Fascia FAQs

Can a roofer replace soffit and fascia in Minnesota?

Not under a roofer-only license. A roofer license only allows roofing work and does not cover soffits or fascia; a residential building contractor or remodeler license does.

How much does soffit and fascia replacement cost?

About $1,050 to $3,300 for a typical job, averaging near $2,500. That is a national range, not a quote.

Can aluminum be wrapped over old wood fascia?

Yes, if the wood underneath is sound. Wrapping rotted fascia hides the rot and lets it keep spreading, so bad boards should be replaced first.

Should soffit and fascia be done with a new roof?

It often makes sense. The gutters come down and the roof edge is open during a reroof, so rotted fascia can be replaced before new drip edge and gutters go on.

Do I need vented soffits?

Usually, yes, if the attic is vented. Minnesota's code ties attic vent area to the attic's size, and soffit vents are the usual intake. See roof ventilation for how it is sized.

Get a soffit and fascia estimate

Tell us which sides of the house need work, what the trim is made of and whether a new roof or gutters are planned. We pass it to our local roofer, who will tell you how they handle soffit and fascia and price the job.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.