Galvalume Metal Roofs
Our local roofer installs and repairs Galvalume metal roofs on homes and outbuildings around North Branch. Galvalume is steel with an aluminum-zinc coating, and it is under a large share of the steel panels here. It suits some roofs better than others.
What a Galvalume Metal Roof Is
A Galvalume metal roof is made of steel sheet that has been hot-dip coated with an alloy of aluminum and zinc, which protects the steel from rust far better than bare steel.
Galvalume is a coating, not a panel shape. It comes as bare silver-gray sheet or as the base under a factory paint finish, and it is rolled into corrugated, ribbed and standing seam profiles. It is one of several metals covered on our metal roofing page.
In plain terms
Coated steel
Steel does the structural work; the aluminum-zinc coating does the rust protection.
Galvalume vs Galvanized Steel Roofing
Galvalume and galvanized steel roofing are both coated steel, but galvanized uses a zinc coating while Galvalume uses an aluminum-zinc alloy, and the two cost differently and behave differently at cut edges and in contact with other materials.
Ask the roofer which coating sits under the paint on any panel you are quoted, along with the gauge and the paint system, since those three things decide how the roof ages.
Galvanized steel
- Zinc coating
- $4.50 to $17 per sq ft installed (older national range)
- Zinc protects scratched and cut edges well
- Common on older farm buildings
Galvalume steel
- Aluminum-zinc coating
- $4 to $9 per sq ft installed (older national range)
- Strong rust resistance on the flat of the panel
- Base for many modern painted panels
What a Galvalume Metal Roof Costs
A Galvalume metal roof cost about $4 to $9 per square foot installed in the newest national range we found that prices it on its own. That figure is dated, national and not a quote.
Prices have moved since then. For comparison, steel roofing in general now runs $6 to $16 per square foot nationally. Our local roofer prices your roof in today's dollars after seeing it.
Galvalume and other steel, national ranges
Installed, per sq ftWant a real price for Galvalume metal roofs?
Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.
What Galvalume Should Not Touch
Galvalume should not touch copper, lead, wet treated lumber, or fresh concrete and mortar, and it should not sit where water running off those materials lands on it, because they attack the aluminum-zinc coating.
This matters most where roofs meet. A copper roof over a bay window that drains onto a Galvalume porch roof below will stain and wear the Galvalume over time. The roofer plans the flashing and drainage so different metals stay apart.
- Copper flashing, gutters or roof runoff
- Lead pipe flashings or lead-based products
- Wet pressure-treated lumber in direct contact
- Concrete, mortar or masonry that stays damp against the panel
- Graphite pencil marks left on bare panels
Where a Galvalume Metal Roof Makes Sense
A Galvalume metal roof makes sense on homes, garages and outbuildings where you want long-lasting steel at a moderate price, either bare for a utility look or painted to match the house.
If you like the durability of coated steel but not the look of panels, stone-coated steel roofing puts stone granules over a coated steel base so the roof reads as shingles or shake.
Painted house panels
Most painted steel panels for houses use a metallic coating under the paint, and Galvalume is a common one.
Bare Galvalume outbuildings
Unpainted Galvalume gives a plain silver finish that suits pole sheds, barns and shops.
Standing seam
Galvalume is rolled into concealed-fastener standing seam panels as well as exposed-fastener profiles.
Want our local roofer to take a look?
Send a few details or call (651) 427-2051, and our local roofer will come and look.
Snow and Ice on a Galvalume Roof
Snow and ice on a Galvalume roof tend to slide off in sheets once the sun or attic heat loosens them, so a Galvalume roof in North Branch needs a plan for where that snow lands.
Chisago County's ground snow load is 50 psf. Sliding snow keeps the load down on the roof but moves it onto whatever is below. Roof snow guards over entries and decks hold it in place to melt off slowly.
Chisago County
50 psf
Ground snow load set by the state; Pine and Kanabec counties are 60 psf.
Galvalume Metal Roof FAQs
How much does a Galvalume roof cost?
About $4 to $9 per square foot installed, in the newest national range we found that prices Galvalume separately. That is older data and not a quote. Our local roofer prices your roof now.
Is Galvalume better than galvanized for a roof?
For most roofs, yes, Galvalume generally holds up better on the flat of the panel, while galvanized protects cut and scratched edges well. The roofer can explain which coating a given panel uses.
Can Galvalume be painted?
Yes, most painted steel roof panels are factory painted over a metallic coating such as Galvalume. Factory paint holds up far better than paint brushed on later.
Can I put a copper roof next to a Galvalume roof?
Yes, but copper runoff must not drain onto the Galvalume, because copper attacks the aluminum-zinc coating. The roofer routes water and flashing to keep the metals apart.
Get a Galvalume metal roof estimate
Send a few details about the building and the look you want. Our local roofer will look at your roof and quote it in current prices.
Call now (651) 427-2051 Roofing in North Branch and the towns around it