Built-Up Roofs

Our local roofer repairs and replaces built-up roofs, the tar and gravel roofs still found on older flat roofs around North Branch. They find the failed spot and fix it, or replace the roof when repairs will no longer hold.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Is a Built-Up Roof?

A built-up roof is a flat roof made of several alternating layers of hot bitumen (asphalt or coal tar) and reinforcing felt or fabric, finished with a top coat of bitumen and a layer of gravel, which is why it is called a tar and gravel roof.

Each ply adds another barrier, so a built-up roof does not depend on a single sheet. The gravel protects the bitumen from sunlight and foot traffic and helps hold it in place. Built-up roofs are heavy, and they are slow and messy to install, which is part of why many owners now choose modified bitumen or a single-ply membrane instead.

Also called

Tar and gravel

BUR, built-up roofing and tar and gravel all describe the same multi-ply system.

Signs Your Built-Up Roof Is Leaking

Your built-up roof is leaking, or about to, when you see blisters, bare patches where the gravel has washed or blown away, cracked or alligatored bitumen, splits along the plies, or flashing pulling away from walls and edges.

Bare spots matter more than they look. Without gravel, sunlight dries out the bitumen and it cracks. Ponding water in low areas also speeds the wear.

  • Blisters or soft bubbles in the surface
  • Bare areas with the gravel gone
  • Cracked or alligatored bitumen
  • Splits or ridges along the felt plies
  • Loose or cracked flashing at walls, curbs and edges
  • Stains on the ceiling below

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

How a Tar and Gravel Roof Is Repaired

A tar and gravel roof is repaired by scraping the gravel off the damaged area, cutting out or opening the failed plies, letting it dry, building new plies of felt and bitumen over it, and putting the gravel back.

  1. 1

    Find the leak

    The roofer matches the inside stain to the roof and checks plies, blisters and flashing nearby.

  2. 2

    Clear the gravel

    Gravel is scraped away so the bitumen and felt can be seen and worked on.

  3. 3

    Cut out the damage

    Blisters and split plies are opened or removed, and wet material is dried or replaced.

  4. 4

    Build new plies

    New felt and bitumen, or a compatible patch, are layered over the area.

  5. 5

    Re-gravel

    Fresh bitumen and gravel go back on to protect the repair.

A flat roof covered in black EPDM rubber membrane with a stone coping edge and a ladder resting on it

Repair costs vary with the size of the damage. General roof leak repair runs $350 to $1,500, a national range and not a quote.

What a New Built-Up Roof Costs

A new built-up roof costs about $4 to $10 per square foot installed, or $7 to $9 by another estimate. These are national ranges, not a quote.

If you are replacing a tar and gravel roof, the removal is heavy work: the gravel and many plies all come off. The roofer may suggest a newer system such as modified bitumen or EPDM, which fall in a similar price range. Our local roofer prices the job after seeing it.

Built-up roofing, installed

Installed, per sq ft, national
Built-up roofNational
$4–$10 /sq ft
Built-up roofNational, second estimate
$4–$10 /sq ft
Built-up roofNational, third estimate
$7–$9 /sq ft

Want a real price for built-up roofs?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

Repair or Replace a Built-Up Roof?

Repair a built-up roof when the damage is limited to a few blisters, splits or flashing points and the roof underneath is dry; replace it when it is near the end of its life, wet in many places, or leaking faster than it can be patched.

Built-up roofs last about 15 to 30 years, or 10 to 20 years by another estimate. An older one with widespread wear is usually a candidate for flat roof replacement. For a business building, see commercial roof replacement.

Repair

  • A few blisters or splits
  • One leaking flashing or drain
  • Dry insulation and firm deck
  • Gravel cover mostly intact

Replace

  • Leaks in several places
  • Wide bare, cracked or alligatored areas
  • Wet insulation or soft deck
  • Roof near the end of its expected life

Built-Up Roof FAQs

How long does a built-up roof last?

About 15 to 30 years, or 10 to 20 years by another estimate.

Can a tar and gravel roof be repaired?

Yes. The gravel is cleared, the damaged plies are cut out and rebuilt, and the gravel goes back on. Repairs work best when the roof around them is still dry and sound.

Why is there gravel on my flat roof?

The gravel protects the bitumen underneath from sunlight and wear. Where it washes or blows away, the bitumen dries out and cracks faster.

Can a new roof go over my tar and gravel roof?

On a home, only if the old roof is dry, sound and the only layer. Minnesota's residential code bans a recover over a water-soaked or deteriorated roof or over two or more existing coverings. The loose gravel also has to come off first.

Can I coat a tar and gravel roof?

Sometimes, after the loose gravel is removed and the surface is repaired. A roof coating only makes sense if the roof is dry and still sound underneath.

Get a tar and gravel roof estimate

Tell us where the roof leaks, what the building is and roughly how old the roof is. Our local roofer will inspect your roof and price the repair or replacement.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.