Roof Coatings

Our local roofer applies coatings to flat and metal roofs around North Branch. A coating is rolled or sprayed on and cures into a seamless waterproof skin. On a sound, dry roof it can put off a replacement; on a wet or failing roof it only hides the problem.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Roof Coatings Do

Roof coatings seal and protect an existing roof by covering it with a liquid-applied layer that cures into a continuous, seamless membrane, which bridges small cracks and seams and shields the roof surface from sunlight and weather.

A coating is a restoration, not a new roof. It works over flat roofs such as EPDM, modified bitumen and built-up roofs, and over metal roofs with worn finishes or leaky fastener lines. It does nothing for wet insulation, a rotted deck or a roof that has already failed.

Best fit

Sound, dry roofs

A coating extends a roof that is still working; it cannot rescue one that is soaked underneath.

What Roof Coatings Cost

Roof coatings cost about $0.65 to $5 per square foot installed, depending on the type. The average coating job is about $1,475, with most between $543 and $2,528. These are national figures, not a quote.

Acrylic sits at the low end and polyurea or polyurethane at the high end. Prep work, repairs before coating and the number of coats all add to the price, so our local roofer prices your roof after seeing its condition.

Roof coatings, installed

Installed, per sq ft, national
AcrylicWater-based, reflective
$0.65–$1.75 /sq ft
BitumenAsphalt-based
$1.25–$2.50 /sq ft
SiliconeMoisture-resistant
$1.50–$2.50 /sq ft
Liquid rubberElastomeric
$1.75–$3.50 /sq ft
Polyurea / polyurethaneTough, impact-resistant
$2–$5 /sq ft

Want a real price for roof coatings?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

Types of Roof Coatings

The main types of roof coatings are acrylic, silicone, polyurethane and polyurea, asphalt-based bitumen coatings and liquid rubber, and each suits a different roof and budget.

The roofer matches the coating to the roof surface, because some coatings do not bond well to others and the wrong primer or product can peel.

Acrylic

A water-based, usually white coating that reflects sunlight; it is the lowest cost but is not meant for roofs where water stands.

Silicone

Holds up well where water ponds and resists weathering, though new coats bond poorly to old silicone.

Polyurethane and polyurea

Tough, impact-resistant coatings for roofs that see foot traffic or need extra durability.

Bitumen and liquid rubber

Asphalt-based and rubber-based coatings used on asphalt roofs, metal and some membranes.

When a Roof Coating Is the Wrong Fix

A roof coating is the wrong fix when the insulation or deck under the roof is wet, when the roof is leaking in many places or when the membrane is badly blistered or detached.

Coating over trapped water seals it in, and the roof keeps rotting underneath. In those cases you need flat roof repair first or a full flat roof replacement.

  • Wet insulation or soft, spongy deck
  • Leaks in several places at once
  • Large blisters or membrane pulling loose
  • Rusted-through metal panels
  • A roof at the end of its life

How a Roof Coating Is Applied

A roof coating is applied by inspecting the roof for wet areas, cleaning it thoroughly, repairing seams and damage, priming where the product calls for it, and then rolling or spraying the coating in one or more coats.

  1. 1

    Inspect

    The roofer checks for wet insulation and soft deck, which must be fixed before any coating.

  2. 2

    Clean

    Dirt, chalking and loose material are washed off so the coating can bond.

  3. 3

    Repair

    Open seams, fasteners, blisters and flashing are fixed and reinforced.

  4. 4

    Prime

    A primer goes down where the manufacturer requires one for that roof surface.

  5. 5

    Coat

    The coating is rolled or sprayed to the thickness the manufacturer specifies, in dry weather above its minimum temperature.

A flat roof covered in black EPDM rubber membrane with a stone coping edge and a ladder resting on it

Want our local roofer to take a look?

Send a few details or call (651) 427-2051, and our local roofer will come and look.

Get Estimate →

Coating a Metal Roof

Coating a metal roof makes sense when the panels are still solid but the finish is worn, surface rust has started, or the fastener lines and seams have begun to leak.

The rust is cleaned and treated, loose or failed fasteners are replaced or sealed, and the seams get reinforcement before the coating goes on. If panels are rusted through or the leaks are structural, metal roof repair comes first. For shingle roofs, coatings are a different subject; see shingle rejuvenation.

Roof Coatings FAQs

How much does a roof coating cost?

About $1,475 on average, with most jobs between $543 and $2,528. Per square foot it ranges from about $0.65 for acrylic to $5 for polyurea. National figures, not a quote.

Will a coating stop my roof from leaking?

Only if the leaks are small and the roof underneath is dry. The seams and leak points are repaired first, and the coating seals the surface. It will not fix wet insulation or a failed roof.

Can a coating go on a flat roof over my garage?

Yes, if the roof is sound. Coatings are used on EPDM, modified bitumen and built-up roofs on homes and garages as well as commercial buildings.

Can roof coatings be applied in a Minnesota winter?

Usually not. Coatings need a clean, dry roof and temperatures above the manufacturer's minimum to cure, so the work is normally done in warmer, dry weather.

Is a coating cheaper than a new flat roof?

Per square foot, yes. Coatings run about $0.65 to $5 per square foot, while new flat roof membranes run about $4 to $16. Both are national figures, not quotes. But a coating only works on a roof that is still sound.

Get a roof coating estimate

Tell us what kind of roof you have, roughly how big it is and what condition it is in. Our local roofer will check whether a coating makes sense and price it.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.