Modified Bitumen Roofs
Our local roofer repairs and replaces modified bitumen roofs on garages, porches, low-slope parts of homes and commercial buildings around North Branch. It is an asphalt-based flat roof laid in rolls. Cracking, blistering or leaking means it needs a look.
What Is a Modified Bitumen Roof?
A modified bitumen roof is a low-slope roof made of asphalt sheets that have been blended with rubber or plastic polymers and reinforced with a fabric mat, laid in overlapping rolls and usually finished with a granule-surfaced cap sheet.
The polymers make the asphalt more flexible in cold and more stable in heat than plain asphalt. SBS-modified sheets are the rubbery kind; APP-modified sheets are the plastic kind and are usually torched on. Most systems use two plies, a base sheet and a cap sheet, which gives the roof some backup if the top layer is damaged.
Also called
Mod bit
Roofers often shorten modified bitumen to mod bit, and the sheets are sometimes called torch-down roofing.
What a Modified Bitumen Roof Costs
A modified bitumen roof costs about $4 to $8 per square foot installed. A higher estimate puts it at $7 to $9. Both are national ranges and not a quote.
That puts mod bit at or near the low end of flat roof prices. The total depends on how much old roof comes off, whether insulation is added, the number of plies and how much wall and edge flashing the roof has. Our local roofer prices your roof after seeing it.
Modified bitumen, installed
Installed, per sq ftWant a real price for modified bitumen roofs?
Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.
How a Modified Bitumen Roof Is Installed
A modified bitumen roof is installed by torching, hot-mopping, cold-gluing or self-adhering the rolled sheets to the roof, and the method depends on the product and the building.
Each method bonds the plies together and to the base. The roofer chooses the one that suits the roof, the product and the safety needs of the building.
Torch-applied
The back of the sheet is heated with a propane torch so the asphalt melts and bonds as it is rolled out.
Hot-mopped
Hot asphalt is mopped down and the sheet is pressed into it, much like a built-up roof.
Cold-applied
The sheet is set in a cold adhesive, with no open flame on the roof.
Self-adhered
A peel-and-stick backing bonds the sheet to the base, also with no flame.
How Long a Modified Bitumen Roof Lasts
A modified bitumen roof lasts about 10 to 30 years. Common estimates are 10 to 20 years, about 20 years and about 30 years.
The spread is wide, so read it as a guide, not a promise. A roof with good drainage, sound flashing and prompt repairs lasts longer than one that holds water.
| Estimate | Modified bitumen lifespan |
|---|---|
| Shorter estimate | 10 to 20 years |
| Middle estimate | About 20 years |
| Longer estimate | About 30 years |
Want our local roofer to take a look?
Send a few details or call (651) 427-2051, and our local roofer will come and look.
Modified Bitumen Under Your Shingles: The Ice Barrier
Modified bitumen can also sit under the shingles on a Minnesota home, because the ice barrier that Minnesota's residential code requires can be a self-adhering polymer-modified bitumen sheet running from the eave to at least 24 inches inside the exterior wall.
North Branch checks the ice barrier at the tear-off inspection. It is the same family of material as a mod bit flat roof, made thinner and sticky-backed. See ice and water shield for more.
Signs a Modified Bitumen Roof Needs Repair
A modified bitumen roof needs repair when the seams or laps open, blisters rise in the surface, the cap sheet cracks or loses its granules, or the flashing where it meets walls and curbs pulls away.
Most of these are fixed with a new piece of cap sheet and sealed laps. Our page on flat roof repair explains how leaks are traced; if the whole roof is worn out, see flat roof replacement.
- Open laps or seams
- Blisters or bubbles in the surface
- Cracks and bare spots where granules have worn off
- Flashing pulling away from walls
- Stains on the ceiling below
Modified Bitumen Roof FAQs
Is modified bitumen the same as a tar and gravel roof?
No. A built-up roof is made from many layers of felt and bitumen with gravel on top, while modified bitumen uses factory-made polymer sheets, usually in two plies.
How much does a bitumen roof cost?
About $4 to $8 per square foot installed, or $7 to $9 in a higher estimate. These are national ranges, not a quote.
Is torch-down roofing safe on a house?
It is done by trained roofers every day, but it does use an open flame. Cold-applied and self-adhered sheets avoid the flame, and the roofer can tell you which method suits your roof.
Can a modified bitumen roof go over my old roof?
Only if the old roof is dry and is the only layer. Minnesota's residential code does not allow a recover over a water-soaked roof or one that already has two or more coverings.
Is modified bitumen better than EPDM?
Neither wins everywhere. Mod bit is tough and multi-ply; EPDM is a single rubber sheet that is simple to patch. The roofer can compare them for your roof.
Get a modified bitumen roof estimate
Tell us what the roof covers, how old it is if you know and what is going wrong. Our local roofer will inspect your roof and price the repair or replacement.
Call now (651) 427-2051 Roofing in North Branch and the towns around it