PVC Roofing

Our local roofer installs and repairs PVC flat roofs around North Branch. PVC is a heat-welded vinyl membrane used on business buildings and on the garages, porches and low-slope additions of homes. They inspect the roof and price the work.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Is PVC Roofing?

PVC roofing is a single-ply polyvinyl chloride membrane, usually white, reinforced with a fabric scrim and laid over a flat or low-slope roof, with every seam heat-welded so the sheets fuse into one watertight surface.

PVC has been used on flat roofs for decades. It is stiffer than rubber and holds up well where oils, grease and many chemicals land on the roof, which is why it shows up over restaurants and some industrial buildings. It is one of the membranes covered on our commercial roofing page.

Lifespan

20 to 30 years

A PVC flat roof typically lasts 20 to 30 years.

What PVC Roofing Costs

PVC roofing costs about $5 to $16 per square foot installed. A narrower estimate puts it at $7 to $10. Both are national ranges and not a quote.

One estimate puts PVC at the top of the flat roof range, while another puts it below TPO and EPDM. So take any published figure as a rough guide only. Our local roofer prices your roof after measuring it and checking what has to come off.

PVC roofing, installed

Installed, per sq ft
Wider estimateNational
$5–$16 /sq ft
Narrower estimateNational
$7–$10 /sq ft

Want a real price for PVC roofing?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

PVC vs TPO vs EPDM

PVC, TPO and EPDM are all single-ply flat roof membranes, but PVC and TPO are heat-welded thermoplastics while EPDM is a rubber with glued or taped seams, and PVC is the one most often chosen where grease or chemicals reach the roof.

TPO roofing is PVC's closest relative and often costs a little less. EPDM roofing is the long-standing rubber option. All three last a similar length of time.

PVCTPOEPDM
MaterialVinyl (polyvinyl chloride)Thermoplastic polyolefinSynthetic rubber
SeamsHeat-weldedHeat-weldedTaped or glued
Usual colorWhiteWhiteBlack
Cost, per sq ft$5 to $16$4 to $14$4 to $13
Lifespan20 to 30 years20 to 30 yearsUp to 30 years

National figures, not a quote.

Where PVC Roofing Makes Sense

PVC roofing makes the most sense on flat roofs that see grease, oils or chemicals, on roofs with a lot of welded detail work, and on home roofs too flat for shingles where the owner wants a welded membrane.

In North Branch, asphalt shingles are not allowed below a 2:12 slope, so the lowest parts of a house need a membrane.

Restaurants

Kitchen exhaust fans put grease on the roof, and PVC is often chosen to stand up to it.

Busy commercial roofs

Roofs crowded with units, curbs and pipes, where every flashing is welded to the field sheet.

Garages and porches

Low-slope home roofs, including porch roofs, where shingles are not an option.

Replacing failed membranes

As the new covering when an old rubber or asphalt roof has worn out and is torn off.

Signs Your PVC Roof Needs Repair

Your PVC roof needs repair when welded seams split, the membrane cracks or is punctured, flashing at walls and curbs comes loose, or you see stains on the ceiling below.

PVC is usually repaired by cleaning the area and heat-welding new PVC over it. For business roofs, see commercial roof repair; for homes, see flat roof repair.

  • Split or open seams
  • Cracks or brittle patches in older sheets
  • Punctures from foot traffic, tools or hail
  • Loose flashing at parapets, curbs and drains
  • Ceiling stains or drips inside

Seeing these signs?

Our local roofer will look at your roof and tell you what it needs. Send a few details or call (651) 427-2051.

Get Estimate →

How a PVC Roof Is Installed

A PVC roof is installed by preparing the deck, laying insulation, fastening or adhering the PVC sheets, heat-welding every seam, and then welding PVC flashing to walls, curbs, drains and edges.

  1. 1

    Tear-off and deck check

    Old layers come off as needed and the roofer replaces any rotted or soft deck.

  2. 2

    Insulation

    Rigid insulation boards go down to form a flat, solid base.

  3. 3

    Sheets and seams

    PVC sheets are fastened or glued, and the overlaps are welded with a hot-air welder.

  4. 4

    Flashing and edges

    PVC flashing and coated metal edging are welded in so the roof is one continuous surface.

A flat roof covered in black EPDM rubber membrane with a stone coping edge and a ladder resting on it

PVC Roofing FAQs

How long does a PVC roof last?

About 20 to 30 years.

Is PVC more expensive than TPO?

It depends on the estimate. One lists PVC at $5 to $16 per square foot against $4 to $14 for TPO. Another puts PVC at $7 to $10 against $8 to $11 for TPO. These are national ranges, not a quote.

Can PVC roofing go on a home?

Yes. PVC works on garages, porches and low-slope additions. Reroofing a residence in North Branch needs a city permit, with a tear-off and a final inspection.

Why do restaurants use PVC roofing?

Because PVC is known to hold up to the grease and oils that kitchen exhaust puts on a roof, which can wear down some other membranes faster.

Can a PVC roof be repaired?

Yes. A PVC patch is heat-welded over the cleaned membrane. Very old, brittle PVC can be harder to weld, and that is one sign it may be time to replace it.

Get a PVC roofing estimate

Tell us what kind of building it is, what the roof is covered with now and what is going wrong. Our local roofer will inspect your roof and price the PVC work.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.