TPO Roofing
Our local roofer installs and repairs TPO flat roofs around North Branch. TPO is a white, heat-welded single-ply membrane used on business buildings and on the garages, porches and low-slope additions of homes. They inspect the roof and price the work.
What Is TPO Roofing?
TPO roofing is a single-ply thermoplastic polyolefin membrane, usually white, that is laid over a flat or low-slope roof and joined at the seams with hot air so the sheets weld into one continuous surface.
The sheet is fastened through the seams or fully glued down over insulation board. Because the seams are welded rather than taped, a well-made TPO seam is as strong as the sheet itself. TPO is one of the core systems on our commercial roofing page, and it is also used on smaller residential flat roofs.
Lifespan
20 to 30 years
A TPO roof typically lasts 20 to 30 years.
What TPO Roofing Costs
TPO roofing costs about $4 to $14 per square foot installed, with one estimate narrower at $8 to $11. These are national ranges and not a quote.
Where your roof lands in that range depends on its size, the tear-off, the insulation thickness, the sheet thickness the roofer recommends and how much detail work there is around vents, curbs and edges. The roofer prices your roof after seeing it.
TPO roofing, installed
Installed, per sq ft, nationalWant a real price for TPO roofing?
Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.
TPO vs EPDM
TPO and EPDM differ mostly in their seams and color: TPO is a white thermoplastic with heat-welded seams, while EPDM roofing is a black rubber with seams joined by tape or adhesive.
Both are proven single-ply membranes, and their price ranges overlap. The deciding points are usually what is on the roof now, how much equipment sits on it and what the roofer prefers to install and service.
EPDM rubber
- Black synthetic rubber
- Seams taped or glued
- Easy to patch with tape and primer
- Lasts up to 30 years
TPO
- White or light thermoplastic
- Seams heat-welded with hot air
- Reflects sunlight instead of absorbing it
- Lasts 20 to 30 years
How TPO Compares With PVC
TPO compares closely with PVC because both are heat-welded thermoplastic membranes, but PVC is a vinyl-based sheet often picked where grease, oils or chemicals reach the roof, while TPO is the more common general-purpose choice.
On price, TPO runs $4 to $14 per square foot and PVC roofing $5 to $16 in one national estimate. Another estimate puts PVC slightly below TPO. If your building has a kitchen exhaust or vents that put oily residue on the roof, ask the roofer whether PVC is worth it.
Where TPO Roofing Fits
TPO roofing fits large, open commercial roofs and smaller residential low-slope areas alike, as long as the roof is flat or nearly flat and the deck under it is sound.
On a house in North Branch, asphalt shingles are not allowed below a 2:12 slope, so very low roofs need a membrane such as TPO.
Retail and office roofs
Large flat roofs where welded seams and a reflective surface suit the building.
Warehouses and shops
Big open roof areas where wide sheets cover ground quickly.
Garages and porches
Low-slope home roofs too flat for shingles, including porch roofs.
Re-covering older roofs
Over a sound existing roof where the code and the roofer allow it, after checking for wet layers.
Want our local roofer to take a look?
Send a few details or call (651) 427-2051, and our local roofer will come and look.
Signs Your TPO Roof Needs Repair
Your TPO roof needs repair when welded seams open up, the membrane is punctured or cracked, flashing at walls and curbs pulls loose, or water stays on the roof and shows up as stains inside.
TPO repairs are usually made by cleaning the old sheet and heat-welding a new patch over the damage. On a business building, our page on commercial roof repair covers how leaks are traced; on a house, see flat roof repair.
- Seams that have opened or were never fully welded
- Punctures from dropped tools, foot traffic or hail
- Loose flashing at parapets, curbs and vents
- Ponding water and stains on the ceiling below
TPO Roofing FAQs
How long does a TPO roof last?
About 20 to 30 years. One estimate gives flat roofs in general 15 to 20 years, so care and installation quality matter.
How much does TPO roofing cost per square foot?
About $4 to $14 installed, or $8 to $11 in a narrower estimate. These are national ranges, not a quote.
Can TPO go on a house?
Yes. TPO is used on garages, porches and low-slope additions where the roof is too flat for shingles. The North Branch reroof permit and inspections apply when a residence is reroofed.
Is TPO or EPDM better in Minnesota winters?
Both are used on Minnesota flat roofs. Neither is clearly better in a cold climate, so ask our local roofer which suits your roof, your drainage and your budget.
Can a TPO roof be patched?
Yes. A TPO patch is heat-welded over the cleaned membrane, and open seams can often be re-welded. Widespread seam failure or wet insulation usually points to replacement.
Get a TPO roofing estimate
Tell us about the roof, its rough size and what is on it now. Our local roofer will inspect your roof and price a TPO repair or a new TPO roof.
Call now (651) 427-2051 Roofing in North Branch and the towns around it