Metal Shingles

Our local roofer installs and repairs metal shingle roofs on North Branch homes. Metal shingles are steel or aluminum shaped to look like asphalt, slate or cedar shake. They suit traditional houses and roofs with dormers, valleys and hips.

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.

What Metal Shingles Are

Metal shingles are small stamped pieces of painted steel or aluminum, shaped to look like asphalt shingles, slate or shake, that interlock on all sides and are fastened to the roof deck in overlapping rows.

The interlocking edges cover the fasteners, so like a standing seam metal roof there are few exposed screws. Some metal shingles are finished in paint only. Others carry stone granules, which is the separate product covered under stone-coated steel roofing.

From the street

Shingle, slate or shake

The metal is stamped into a traditional shape and painted to match.

What Metal Shingles Cost

Metal shingles cost about $6 to $22 per square foot installed, a national range and not a quote for your home.

The low end is plain painted steel in a simple shingle shape. The high end covers aluminum, premium paint and slate or shake profiles on complicated roofs. For comparison, standing seam runs $7 to $30 and corrugated $3.50 to $26.

Metal shingles vs other roofs

Installed, per sq ft
Metal shinglesNational
$6–$22 /sq ft
Standing seamNational
$7–$30 /sq ft
Architectural shinglesNational
$4–$6 /sq ft

Want a real price for metal shingles?

Our local roofer will look at your roof and give you a written estimate. Send a few details or call (651) 427-2051.

Get Estimate →

Metal Shingles vs Asphalt Shingles

Metal shingles cost more than asphalt shingles but last much longer, with metal roofs at about 40 to 70 years against roughly 25 to 30 years for architectural asphalt.

Both can look much alike from the curb. The question is whether you will stay in the house long enough for the longer life to pay back the higher price. If not, a good architectural shingle roof is the practical choice.

Architectural asphalt

  • About $4 to $6 per sq ft
  • About 25 to 30 years
  • Holds snow on the roof
  • Granules wear off over time

Metal shingles

  • About $6 to $22 per sq ft
  • About 40 to 70 years for metal
  • Profile helps hold snow better than smooth panels
  • Paint finish, no granule loss

When Metal Shingles Are the Better Metal Choice

Metal shingles are the better metal choice when your roof has many dormers, valleys, hips or skylights, when you want a traditional look, or when you would rather not have long panels sending snow off the roof in sheets.

On a simple gable roof, long panels are usually faster and cheaper to install. The roofer can show you both on your roof plan.

Cut-up roofs

Small pieces fit around dormers, valleys and chimneys with less waste than long panels.

Traditional homes

Slate, shake and shingle profiles keep the character of an older or traditional house.

Snow behavior

The stepped profile breaks up the surface, so snow tends to hold and melt rather than slide all at once.

Repairs

A damaged piece can often be replaced on its own; see metal roof repair.

Want our local roofer to take a look?

Send a few details or call (651) 427-2051, and our local roofer will come and look.

Get Estimate →

How Metal Shingles Are Installed in North Branch

Metal shingles are installed in North Branch by pulling a reroof permit, tearing off to the deck, passing the city's tear-off inspection of the deck and ice barrier, then fastening the interlocking shingles in rows from the eave up.

The city requires a permit and two inspections; see its re-roofing permit process.

  1. 1

    Permit

    North Branch requires a permit to reroof a residence, pulled by the homeowner or a state-licensed contractor.

  2. 2

    Tear-off and deck

    Old roofing comes off and soft decking is replaced, since the shingles fasten to a solid deck.

  3. 3

    Ice barrier inspection

    The inspector confirms the ice and water barrier runs 24 inches up past the exterior wall; see ice and water shield.

  4. 4

    Shingles, trim and final

    Starter strips, shingles, valleys, ridge and flashing go on, and the final inspection checks all roofing and flashing is in place.

An aerial view of a large house with a dark blue standing seam metal roof and multiple hip sections

Metal Shingles FAQs

How much do metal shingles cost?

About $6 to $22 per square foot installed. That is a national range, not a quote. Our local roofer prices your roof after seeing it.

Do metal shingles look like real shingles?

Yes, from the street most metal shingles look like asphalt shingles, slate or shake, depending on the profile. Up close the metal and paint finish show.

Does snow slide off metal shingles?

Less than off smooth panels, because the stepped profile holds snow better. On a steep roof it can still slide, so ask about roof snow guards over entries.

Can metal shingles go over my old roof?

Sometimes. Minnesota code allows a recover when the manufacturer permits it. It is not allowed over a water-soaked or deteriorated roof, or one that already has two or more layers. The roofer checks at the inspection.

Are metal shingles the same as stone-coated steel?

No, stone-coated steel has stone granules bonded over the metal, while plain metal shingles have a paint finish only. Both interlock and mimic traditional roofing.

Get a metal shingle estimate

Tell us about your roof and the look you want. Our local roofer will inspect your roof and price metal shingles for your home.

Call now (651) 427-2051 Roofing in North Branch and the towns around it

Request a Roof Inspection

Fill in the form below or call us now on (651) 427-2051

Best way to reach you *

Thanks, we've passed your request to our local roofer and they'll be in touch shortly.